Yeti 137 MT (2020)

  • Sale
  • Regular price $9,999.99


EXPLORE THE LIMIT OF THE DEEP SNOW, DEEP TREE RIDING, AND EXPERIENCE HIGH HORSEPOWER TURBO BIG HILL CLIMBING.  EVERYTHING ON THIS SYSTEM IS GEARED TOWARD HELPING YOU TO REACH HIGHER AND PERFORM BETTER.

The YETI 137 MT capture the optimal combination of floatation and grip to get the extra horse power. With a wide track on the new narrow rail design, it provides the maximum grip, agility and output that allows the track to operate at a lower tension. It also smooths out power transfer in sharp turns or on steep side hills. Its versatility makes it the go-to choice for those seeking to tackle mountain snows and deep tree rides confidently.

  • A 12.5-inch wide track on 5.5-inch narrow rail chassis gives riders more track floatation with the agile feel of a narrower system.

  • 2.5-inch paddles for bringing better lift and traction in deep snow.

  • Optimized internal/external sprockets allow lower track tension for increased grip even in the deepest snow.

  • A stronger chassis with local reinforcement to dissipate the stress under high load.

  • YETI-ELKA-SHOCK-STAGE-3

    ELKA SHOCK - STAGE 3

    Allows low speed compression adjustment to adapt different types of riders.

    YETI-SLIP-DRIVERS

    2.86 NO-SLIP DRIVERS

    Higher load capacity at lower track tension to avoid ice buildup.

    YETI-SOFT-STRUT

    SOFT STRUT

    An industry first “SOFT STRUT” providing 1/2'' of movement adding compliance under heavy load without affecting deep snow performance.

    190405_YetiSnowMX_Accessories_Brake_lever_1100x620_NEW.png

    DUAL-PISTON CALIPER BRAKES

    HAYES pre-bleed brake system to ensure ideal brake performance.

    CAMSO-SNOW-BIKE-TRACK

    CAMSO SNOW BIKE TRACK

    Lightweight 137-inch track, 12.5 inches wide and deep 2.5 inch lugs.

     

    190405_YetiSnowMX_Accessories_Brake_system_1100x620_NEW.png

    PRE-BLEED BRAKE SYSTEM

    Comes from the factory with a 11mm master cylinder calibrated with brake caliper. Progressive and smooth brake feel. Reduced installation time without bleeding needed!

    SPECIFICATIONS

    DIMENSIONS & WEIGHT

    Estimated Dry Weight-Front

    17.9 lb

    Estimated Dry Weight-Rear

    100 lb

    Overall Length

    73"

    Overall High

    20”

    Overall Width

    16''

    TRACK

    Model

    Camso Snowbike Track

    Length

    137"

    Width

    12.5"

    Pitch

    2.86"

    Lug height

    2.5"

    Rail spacing

    5.5"

    CHASSIS & DRIVE SYSTEM

    Chassis

    Carbon Fibre/NEW Clear gel coat

    Chain Slider

    Standard POM

    Automatic Chain Tensioner

    Standard POM

    Brake system

    NEW Hayes V32 - Dual Piston Caliper, sheilded rotor with anti-rattle pad clip

    Master Cylinder

    NEW Hayes pre-bled, Right Hand, 11mm piston

    Syncrodrive, Belt drive system

    Mitsuboshi 28 mm Width/896 mm length

    Quick Access Belt Drive

    LEXAN

    Drive Chain

    DID520VOX 60 or 62 Link (master link)

    Drive Shaft

    1 1/16" Hex, Titanium, 7 tooth Anti-ratchet sprocket

    Drive Shaft Sprocket

    16 tooth- Splined

    Upper Syncrodrive Belt Drive Gear

    41 tooth- Splined

    Lower Syncrodrive Belt Gear

    47 tooth- Splined

    Hardware & Fasteners

    Titanium, Anodized Aluminum & Stainless Steel

    SUSPENSION

    Front & Rear Shock

    Elka shock Stage 3

    Rear Suspension

    Titanium reactor Arms

    Front Suspension Arm

    Powder coated steel w/ STRENX reinforcements

    Rear Travel

    16.0" (40,64 cm)

    Strut

    YETI Soft Strut

    MAXKEEL SKI

    Ski Design

    Parabolic design, 20" Radius

    Ski length

    42" (106.68cm)

    Ski Material

    UHMW

    Skag Type

    Hardox, Zinc Plated

    “We rode a 137 MT system which actually handled like the 129 SS model we come to love so much. We’re talking more floatation, about 20% more power and 20% more nimbleness than the same size 2019 model.”

    — Toby Till, YETI SnowMX dealer